Below is a Review of The Current Ryobi Impact Drivers Available in 2022
| Ryobi Impact Driver | R18IDBL-0 | R18ID3-0 | RID1801M |
| Review Rating |  (4.7 / 5) |  (4.5 / 5) |  (4.3 / 5) |
| Max Torque | 270Nm | 220Nm | 220Nm |
| Impacts Per Minute | 3,900 | 3,400 | 3,400 |
| Max No Load Speed (RPM) | 3,000 | 3,200 | 3,200 |
| Brushless Motor | Yes | No | No |
| Adjustable Speed Settings | 4 Modes | 3 Modes | No |
| Variable Speed Trigger | Yes | Yes | Yes |
| Electric Brake | Yes | Yes | Yes |
| Unit Weight | 1.1Kg | 1.2Kg | 1.2Kg |
Ryobi 18v R18IDBL-0 – Best Ryobi Impact Driver
Review Rating: 
(4.7 / 5)
- Max Torque: 270Nm
- Impacts per Minute: 3,900
- Max No Load Speed: 3,000 RPM
- Variable Speed Trigger
- Electric Brake
- 4 Speed Settings
- Brushless Motor: Yes
- Built in light: Yes, 3 LED Lights
- Belt Clip: No
- Body Weight: 1.1kg
The R18IDBL-0 is Ryobi’s top of the range impact driver making it the best impact driver they have. This Ryobi cordless impact driver has a huge 270Nm of torque, 3,900 IPM and 3,000 RPM, with all that power, this impact driver will tackle most fastening and unfastening jobs with ease.
This Ryobi impact driver has a brushless motor to ensure it can deliver high performance at all times, prolong the life of the tool and provide better battery performance.
With this Ryobi impact driver, you are able to adjust how much power is delivered with its 3 adjustable pre-settings, weather you are fitting delicate hinges to fastening large bolts, the pre-settings have you covered.
The 3 pre-set settings give you the following power:
- Low: 650 RPM & 50Nm
- Medium: 1,700 RPM & 100Nm
- High: 3,000 RPM & 270Nm
It comes with a special mode for driving decking screws called DeckDrive. In this mode the impact driver stats off slow to ensure the screw goes in without damaging the timber, once in, it speeds up to full speed, than once the screw is almost in, it slows down to ensure the screw is a flush fit and you don’t accidently drive it too far into the timber. This mode can be used for other jobs other than decking, however, it is optimised for screws that are around 10x40mm.
The R18IDBL-0 Ryobi impact driver works with Ryobi ONE+ 18v battery range, as with all Ryobi products, batteries are sold separately.
If you are looking for the best Ryobi impact driver, this is it!
Ryobi R
18ID3-0 Review
Review Rating: 
(4.5 / 5)
- Max Torque: 220Nm
- Impacts per Minute: 3,400
- Max No Load Speed: 3,200 rpm
- Variable Speed Trigger
- Electric Brake
- 3 Speed Settings
- Brushless Motor: No
- Built in light: Yes, 3 LED Lights
- Belt Clip: No
- Body Weight: 1.2kg
The Ryobi 18v R18ID3-0 is Ryobi’s mid-range impact driver that has some serious power. With 220Nm of torque, 3,400 IPM and 3,200 fastening and unfastening screws and bolts will be an ease.
The Ryobi 18v R18ID3-0 imapct driver has 3 pre-set adjustable speeds, making this Ryobi impact driver versatile, whether you are driving small cabinet screws or large screws into timber, you can select the right power setting for the job.
The following pre-set power speeds are:
- Low: 1,800 RPM & 40Nm
- Medium: 2,500 RPM & 120Nm
- High: 3,200 RPM & 220Nm
This impact driver has a magnetic pad on its base, this magnetic pad will hold numerous screws, nuts and bolts, giving you quick access to help speed up jobs.
This Ryobi cordless impact driver is compatible with the ONE+ range of batteries and chargers which will need to be purchased separately.
Ryobi 18v RID1801M Review
Review Rating: 
(4.3 / 5)
- Max Torque: 220Nm
- Impacts per Minute: 3,400
- Max No Load Speed: 3,200 rpm
- Variable Speed Trigger
- Electric Brake
- Brushless Motor: No
- Built in light: Tri Beam LED
- Belt Clip: No
- Body Weight: 1.2kg
The Ryobi 18v RID1801M is their entry level, high quality impact driver. It has the same amount of power as the Ryobi 18v R18ID3-0 but lacks the power adjustable settings.
It has a variable speed trigger that allows you to control how much power is delivered and an electric brake that stops the chuck from spinning when you let go of the trigger.
It has a magnetic pad located on the top of the base of the impact driver. This magnetic pad will allow you to attach numerous screws and bolts, this saves you from stopping what you are doing to get the next screw or bolt.
This cordless impact driver has 3 bright lights by the chuck, this helps light up and give you a better view in those dark awkward arears.
This Ryobi impact driver works with Ryobi’s ONE+ battery rang which is interchangeable with many of their other tools such as Ryobi impact wrenches, Ryobi drills and more.
What is The Best Ryobi Impact Driver?
- Ryobi R18IDBL-0 – This is Ryobi’s best impact driver. It has incredible power, 4 adjustable modes including their new DeckDrive feature, solid build quality and their only impact driver that is brushless.
- Ryobi R18ID3-0 – For a mid-range impact driver, Ryobi have packed in some impressive specs. 220Nm torque, 3,400 IPM, 3,200 RPM and 3 pre-set adjustable speeds for precision or power.
- Ryobi RID1801M – Even Ryobi’s entry level impact driver is packed with power, 220Nm torque, 3,400 IPM, 3,200 RPM.
Are Ryobi Impact Drivers Any Good?
Ryobi impact drivers are made to a very high quality standard, and have been proven reliable and robust. Ryobi tools are mainly for consumers such as DIY enthusiasts and general home users, hence why they refer to their products as home and garden range. You will see some contractors using Ryobi tools as they are good quality. In our Ryobi impact driver review above, you can see they have very good specs, and their impact driver will perform most tasks. If you want to learn more about what impcat drivers can be use for, check this articleout: best use for an impact driver.